LC54-Digilog
LC54-Digilog – LaserControl

- Highly dynamic measurement of all tool features supports fast, reliable control in the machining process.
- MicroTool mode automatically activates for micro-tools to deliver maximum precision.
-
Non-contact measurement of all tool types, shapes, and cutting materials provides broad application flexibility.
-
Detection of geometry changes helps identify cutting-edge wear early and maintain machining quality.
- Process-integrated temperature compensation ensures consistently high part accuracy.
-
Reliable compensation of spindle growth and pitch circle errors supports stable, accurate measurement.
-
Automatic concentricity control recognises poor tool holders and contamination.
-
Up to 60% shorter measuring and inspection time improves efficiency, with thousands of measured values captured per second.
-
Calibration, data-stream evaluation, and dynamic speed adjustment support precise performance, with automatic filtering of dirt and coolant build-up.
-
High-end laser optics and advanced optical protection deliver nanometre-range repeatability, high absolute accuracy, and reliable results even under coolant mist.
BLUM Standard Measuring Cycles
The measuring cycles for BLUM laser measuring systems can be used to measure and monitor over 90 % of all conventional cutting tools. The measuring cycles are available for many conventional controls. Your local BLUM-representative will gladly inform you about the range of features for your control.
- Tool Breakage Detection: Breakage detection of centric tools such as drills, mills, engraving tools, taps and reamers.
-
Tool setting: Non-contact tool setting in length and radius at nominal speed, including compensation of dynamic spindle drift at high rotational speeds.
-
Single cutting-edge monitoring: Monitoring of tools for broken or missing cutting edges.
-
Tool Form Measurement and Monitoring: Setting, monitoring and inspection of tools with circular cutting edge geometry, including length, radius and cutting edge radius, as well as cracks and wear.
-
Wear and temperature compensation: Compensation of tool wear between machining steps and temperature-dependent thermal behaviour of machining centres.
-
SpindleControl and 3D ToolControl: Recording of spindle wear and detailed representation of tool form errors, wear and defects on cutting edges.
-
Advanced tool monitoring cycles: Rapid run-out checks, micro-wear control, chamfer and conical tool measurement, profile, tool tip and grinding tool control, plus tool orientation correction.
-
Adaptive machining: Determination of parameters for adaptive machining and process control between and after the machining steps.
- Plus much more!
Technical data
- Max. Tool diameter: 16 mm
- Minimum tool diameter*: 5**/10 µm
- Repeat accuracy*: 0.2 μm 2σ
- Size: 120 x 55 x 54 mm (LxWxH)
* Dependent on installation situation and stability of fastening. ** Consultation with local BLUM representative required.
Further information can be found in the respective brochure and in the operating instructions.
|
HPC Nozzle: Reliable tool cleaning
|
LC-VISION
|
|
Completely redeveloped HPC nozzle for fast, residue-free removal of coolants, chips and contaminants.
|
Measuring and visualisation software for DIGILOG laser measuring systems.
|
LC54-Digilog – Applications


